LONG-JOIN JL-3 Series Lamp Socket Type Controller
Description
LONG-JOIN Intelligent has developed the JL-3 series, a twist-lock light socket type photosensor that can automatically control twist-and-lock light bulbs.
The JL-30X series is suitable for E26/E27 sockets, while the JL-31X series is suitable for E12 sockets.
The lamp socket type photosensor is suitable for automatically controlling channel lighting and porch lighting based on environmental lighting levels.
he product is designed with an electric heating structure, which provides delay control function to avoid redundant switching of spotlight or lightning at night. Regardless of the operating temperature, the temperature compensator system can provide consistent performance. JL-301/311 is designed with electronic circuits equipped with CDS sensors.
JL-3X Series Parameters
| item | Base type | Max Loading | Dimension(L*W*H)mm | Sensor Type |
| JL-301A | E26 | 150W(Tungsten) | 36.6*36.6*68 | CDS |
| JL-302A | E26/E27 | 150W(Tungsten /CFL/LED) | 86*70*94 | CDS |
| JL-303A | E26/E27 | 150W(Tungsten /CFL/LED) | 40.5*40.5*78 | CDS |
| JL-311A | E12 | 75W(Tungsten) | 34.5*22.3*38.3 | CDS |
| JL-312C | E12 | 75W(Tungsten / CFL /LED) | 24*24*40.5 | Phototransistor |
| JL-320C | E26 | 150W(Tungsten /CFL/LED) | 43.2*43.2*72.2 | Phototransistor |
JL-3 Series Wiring Diagram
JL-3 Series Troubleshooting
It is recommended to have a licensed electrician install the equipment. The installation and use of the device should comply with national electrical regulations, local laws, and relevant industry standards.
Check if the circuit voltage matches the voltage displayed on the socket control label. To avoid fire, conflict, or death, turn off the power, and then test whether the power is off by wiring a breaker or panel.
Do not aim the photosensitive hole towards artificial light sources such as bright windows, navigation reflectors, street lamps, etc., as it may cycle on and off at night.